LANDAUER
LANDAUER ServicesWhole Body DosimetryExtremity DosimetryNeutron DosimetryOther products
Luxel+ dosemeter

Contact Us


Associated services
Whole body dosimetry | Luxel+ | Associated services | Design | OSL technology | Approvals

Reanalysis of dosemeters

OSL detectors can be stimulated numerous times to confirm the validity of a radiation dose measurement. A full reanalysis is automatically performed for every dosemeter with an assessed dose in excess of 5 mSv.

Doses investigationImaging area

Exposition dynamique
> Dynamic exposure

Exposition statique
> static exposure

The analysis of the Imaging component renders unique filter patterns that provide qualitative information about the conditions during exposure. Imaging to identify static, dynamic, or contamination conditions is automatically performed for all beta and low-energy photon measurements yielding a dose in excess of 5 mSv. Imaging capabilities are inconclusive at energies exceeding 150 keV.

A static exposure image indicates the dosemeter was still with no movement at the time of exposure. This is verified by the distinct grid patterns in the filter pack imaging area. A static exposure implies that the dosemeter may not have been worn at the time of exposure, and an accidental exposure may have occurred.

A dynamic exposure image indicates the dosemeter was moving at the time of exposure. This is verified by the blurred grid patterns in the filter pack imaging area. A dynamic exposure implies that the dosemeter was worn at the time of exposure, and the reported dose is valid.

Reanalysis or imaging at doses less than 5 mSv can be requested to our Customer Service. Imaging is not available for doses less than 0.5 mSv.

top



LANDAUER Portal

LANDAUER
HOME | CONTACT US | LIBRARY | SITE MAP | APPROVALS
TERMS OF USE | PRIVACY NOTICE | COOKIES DECLARATION

Copyright © 2018 LANDAUER. All rights reserved.